• DWS water softeners
  • DWI iron removal filters
  • DWS PLUS water softeners and iron removal filters
  • DWS TWIN continuous-duty water softeners
  • DWS DUPLEX continuous-duty water softeners
  • DWA MIX water softeners, iron removal filters and organic matter reducers
  • DWS CAB water softeners and iron removal filters
  • RDWI iron and hydrogen sulphide removal filters
  • DWO Manual water odour and taste removal filters
  • DWO Automatic water odour and taste removal filters
DWS 9 water softener
DWS 9 effectively softens water and reduces iron, manganese and ammonium content, providing quality and safe water for daily use. The device helps to prevent limescale deposits on plumbing and household appliances, prolongs the service life of equipment and improves the taste of water.
Diamond Water Services uses only high quality and proven components, ensuring reliable and long-term efficient operation.
The filter is intended for cottages, private houses, etc. with water consumption up to 10 m³ per month, where the iron content in the water does not exceed 2.5 mg/l.
The unit is equipped with Clack WS1 control unit, which ensures fully automatic system operation – purification and regeneration after actual water consumption. This allows you to optimize salt and water consumption, reducing operating costs.
The regeneration is done with salt tablets (NaCl), which is a simple, convenient and economical solution for daily use.
NB!
1. The filter does not reduce the organic matter content in the water (permanganate index). If this value is higher, we recommend choosing a DWA series filter or contact our customer consultant to find the most appropriate solution.
2. The filter does not remove hydrogen sulphide (rotten egg-like) odor. If this is the case, we recommend to choose one of the DWI or DWC series, or contact our specialists for individual consultation.
695.21 € 695.21 EUR
DWS 10 water softener
DWS1054 effectively softens water and reduces iron, manganese and ammonium content, providing quality and safe water for daily use. The device helps to prevent limescale deposits on plumbing and household appliances, prolongs the service life of equipment and improves the taste of water.
Diamond Water Services uses only high quality and proven components, ensuring reliable and long-term efficient operation.
The filter is intended for cottages, private houses, etc. with water consumption up to 15 m³ per month, where the iron content in the water does not exceed 2.5 mg/l.
The unit is equipped with Clack WS1 control unit, which ensures fully automatic system operation – purification and regeneration after actual water consumption. This allows you to optimize salt and water consumption, reducing operating costs.
The regeneration is done with salt tablets (NaCl), which is a simple, convenient and economical solution for daily use.
NB!
1. The filter does not reduce the organic matter content in the water (permanganate index). If this value is higher, we recommend choosing a DWA series filter or contact our customer consultant to find the most appropriate solution.
2. The filter does not remove hydrogen sulphide (rotten egg-like) odor. If this is the case, we recommend to choose one of the DWI or DWC series, or contact our specialists for individual consultation
757.63 € 757.63 EUR
DWS 12 water softening equipment
DWS 12 effectively softens water and reduces iron, manganese and ammonium content, providing quality and safe water for daily use. The device helps to prevent limescale deposits on plumbing and household appliances, prolongs the service life of equipment and improves the taste of water.
Diamond Water Services uses only high quality and proven components, ensuring reliable and long-term efficient operation.
The filter is intended for cottages, private houses, etc. with water consumption up to 20 m³ per month, where the iron content in the water does not exceed 2.5 mg/l.
The unit is equipped with Clack WS1 control unit, which ensures fully automatic system operation – purification and regeneration after actual water consumption. This allows you to optimize salt and water consumption, reducing operating costs.
The regeneration is done with salt tablets (NaCl), which is a simple, convenient and economical solution for daily use.
NB!
1. The filter does not reduce the organic matter content in the water (permanganate index). If this value is higher, we recommend choosing a DWA series filter or contact our customer consultant to find the most appropriate solution.
2. The filter does not remove hydrogen sulphide (rotten egg-like) odor. If this is the case, we recommend to choose one of the DWI or DWC series, or contact our specialists for individual consultation.
841.23 € 841.23 EUR
DWS 13 water softener
DWS 13 effectively softens water and reduces iron, manganese and ammonium content, providing quality and safe water for daily use. The device helps to prevent limescale deposits on plumbing and household appliances, prolongs the service life of equipment and improves the taste of water.
Diamond Water Services uses only high quality and proven components, ensuring reliable and long-term efficient operation.
The filter is intended for cottages, private houses, etc. with water consumption up to 25 m³ per month, where the iron content in the water does not exceed 2.5 mg/l.
The unit is equipped with Clack WS1 control unit, which ensures fully automatic system operation – purification and regeneration after actual water consumption. This allows you to optimize salt and water consumption, reducing operating costs.
The regeneration is done with salt tablets (NaCl), which is a simple, convenient and economical solution for daily use.
NB!
1. The filter does not reduce the organic matter content in the water (permanganate index). If this value is higher, we recommend choosing a DWA series filter or contact our customer consultant to find the most appropriate solution.
2. The filter does not remove hydrogen sulphide (rotten egg-like) odor. If this is the case, we recommend to choose one of the DWI or DWC series, or contact our specialists for individual consultation.
924.83 € 924.83 EUR
DWI 10 water iron removal system
DWS series DWI 10 is a reagent-free water iron removal unit designed for efficient drinking and domestic water treatment for private homes, cottages and commercial buildings.

The main advantages:
🔹 Effectively cleans water from three main problems – removes iron, manganese and unpleasant hydrogen sulphide (rotten egg) odor.
🔹 Reagent-free technology – no salt or chemicals are used for system flushing, only water and air.
🔹 Fully automatic operation – premium US control unit Clack WS1CI ensures automatic rinsing according to actual water consumption.
🔹 Protects plumbing and household appliances – reduces the formation of iron deposits, protecting boilers, washing machines, faucets and other devices from clogging and premature wear.

How does the machine work?
The water first passes through the aeration chamber, where, in contact with air, the iron and manganese oxidize and turn into solid particles. They are then effectively retained by the multi-layer filtering filler (Manganox and quartz sand), ensuring clean, clear and quality water.

Technical Specification:
• Rated output (flow): 0.6 m³/h
• Maximum yield: 3.0 m³/h
• Water consumption per rinse: ~160 litres
• Minimum flushing flow: 1.6 m³ (27.0 l/min)
• Dimensions (Diameter x Height): 250 × 570 mm
• Weight (empty unit): 71 kg
• Connection dimensions: Inlet/Exhaust: 1", Drainage: 3/4"

General technical characteristics and water quality limits
• Control box: automatic Clack WS1CI 1" (US).
• Filling type: Manganox catalytic filter material, quartz sand of various fractions.
• Tank material: composite material – PE with fiberglass sheath.
• Power supply voltage: 220 V / 50 Hz (with 24 V adapter), power -10 W.
• Operating pressure: 2.0 – 3.5 bar (maximum pressure up to 10 bar).

Water quality limit values for treatment:
• Oxidized iron (Fe³⁺): max. 15 000 µg/l
• Dissolved iron (Fe²⁺): max. 3 000 µg/l
• Manganese (Mn²⁺): max. 100 µg/l
• Hydrogen sulfide (H₂S): max. 5 mg/l
• Permissible pH level (for iron removal): 6.8 – 9.0
• Permissible pH level (for manganese removal): 8.0 – 9.0
754.80 € 754.8000000000001 EUR
DWI 12 water iron removal system
DWS series DWI 12 is a reagent-free water iron removal unit designed for efficient drinking and domestic water treatment for private homes, cottages and commercial buildings.

The main advantages:
🔹 Effectively cleans water from three main problems – removes iron, manganese and unpleasant hydrogen sulphide (rotten egg) odor.
🔹 Reagent-free technology – no salt or chemicals are used for system flushing, only water and air.
🔹 Fully automatic operation – premium US control unit Clack WS1CI ensures automatic rinsing according to actual water consumption.
🔹 Protects plumbing and household appliances – reduces the formation of iron deposits, protecting boilers, washing machines, faucets and other devices from clogging and premature wear.

How does the machine work?
The water first passes through the aeration chamber, where, in contact with air, the iron and manganese oxidize and turn into solid particles. They are then effectively retained by the multi-layer filtering filler (Manganox and quartz sand), ensuring clean, clear and quality water.

Technical Specification:
• Rated output (flow): 0.9 m³/h
• Maximum yield: 4.0 m³/h
• Water consumption per rinse: ~220 litres
• Minimum flushing flow: 2.0 m³ (33.0 l/min)
• Dimensions (Diameter x Height): 300 × 1520 mm
• Weight (empty unit): 105 kg
• Connection dimensions: Inlet/Exhaust: 1", Drainage: 3/4"

General technical characteristics and water quality limits
• Control box: automatic Clack WS1CI 1" (US).
• Filling type: Manganox catalytic filter material, quartz sand of various fractions.
• Tank material: Composite material – PE with fiberglass sheath.
• Power supply voltage: 220 V / 50 Hz (with 24 V adapter), power -10 W.
• Operating pressure: 2.0 – 3.5 bar (maximum pressure up to 10 bar).

Water quality limit values for treatment:
• Oxidized iron (Fe³⁺): max. 15 000 µg/l
• Dissolved iron (Fe²⁺): max. 3 000 µg/l
• Manganese (Mn²⁺): max. 100 µg/l
• Hydrogen sulfide (H₂S): max. 5 mg/l
• Permissible pH level (for iron removal): 6.8 – 9.0
• Permissible pH level (for manganese removal): 8.0 – 9.0
828.25 € 828.25 EUR
DWI 13 water iron removal system
DWS series DWI 13 is a reagent-free water iron removal unit designed for efficient drinking and domestic water treatment for private homes, cottages and commercial buildings.

The main advantages:
🔹 Effectively cleans water from three main problems – removes iron, manganese and unpleasant hydrogen sulphide (rotten egg) odor.
🔹 Reagent-free technology – no salt or chemicals are used for system flushing, only water and air.
🔹 Fully automatic operation – premium US control unit Clack WS1CI ensures automatic rinsing according to actual water consumption.
🔹 Protects plumbing and household appliances – reduces the formation of iron deposits, protecting boilers, washing machines, faucets and other devices from clogging and premature wear.

How does the machine work?
The water first passes through the aeration chamber, where, in contact with air, the iron and manganese oxidize and turn into solid particles. They are then effectively retained by the multi-layer filtering filler (Manganox and quartz sand), ensuring clean, clear and quality water.

Technical Specification:
• Rated output (flow): 1.0 m³/h
• Maximum yield: 5.0 m³/h
• Water consumption per rinse: ~270 litres
• Minimum flushing flow: 2.6 m³ (43.0 l/min)
• Dimensions (Diameter x Height): 330 × 1570 mm
• Weight (empty unit): 125 kg
• Connection dimensions: Inlet/Exhaust: 1", Drainage: 3/4"

General technical characteristics and water quality limits
• Control box: automatic Clack WS1CI 1" (US).
• Filling type: Manganox catalytic filter material, quartz sand of various fractions.
• Tank material: Composite material – PE with fiberglass sheath.
• Power supply voltage: 220 V / 50 Hz (with 24 V adapter), power -10 W.
• Operating pressure: 2.0 – 3.5 bar (maximum pressure up to 10 bar).

Water quality limit values for treatment:
• Oxidized iron (Fe³⁺): max. 15 000 µg/l
• Dissolved iron (Fe²⁺): max. 3 000 µg/l
• Manganese (Mn²⁺): max. 100 µg/l
• Hydrogen sulfide (H₂S): max. 5 mg/l
• Permissible pH level (for iron removal): 6.8 – 9.0
• Permissible pH level (for manganese removal): 8.0 – 9.0
885.15 € 885.15 EUR
DWI 14 water iron removal system
DWS series DWI 14 is a reagent-free water iron removal unit designed for efficient drinking and domestic water treatment for private homes, cottages and commercial buildings.

The main advantages:
🔹 Effectively cleans water from three main problems – removes iron, manganese and unpleasant hydrogen sulphide (rotten egg) odor.
🔹 Reagent-free technology – no salt or chemicals are used for system flushing, only water and air.
🔹 Fully automatic operation – premium US control unit Clack WS1CI ensures automatic rinsing according to actual water consumption.
🔹 Protects plumbing and household appliances – reduces the formation of iron deposits, protecting boilers, washing machines, faucets and other devices from clogging and premature wear.

How does the machine work?
The water first passes through the aeration chamber, where, in contact with air, the iron and manganese oxidize and turn into solid particles. They are then effectively retained by the multi-layer filtering filler (Manganox and quartz sand), ensuring clean, clear and quality water.

Technical Specification:
• Rated output (flow): 1.5 m³/h
• Maximum yield: 5.0 m³/h
• Water consumption per rinse: ~400 litres
• Minimum flushing flow: 3.0 m³ (50.0 l/min)
• Dimensions (Diameter x Height): 370 × 1870 mm
• Weight (empty unit): 150 kg
• Connection dimensions: Inlet/Exhaust: 1", Drainage: 3/4"

General technical characteristics and water quality limits
• Control box: automatic Clack WS1CI 1" (US).
• Filling type: Manganox catalytic filter material, quartz sand of various fractions.
• Tank material: composite material – PE
with a fiberglass sheath.
• Power supply voltage: 220 V / 50 Hz (with 24 V adapter), power -10 W.
• Operating pressure: 2.0 – 3.5 bar (maximum pressure up to 10 bar).

Water quality limit values for treatment:
• Oxidized iron (Fe³⁺): max. 15 000 µg/l
• Dissolved iron (Fe²⁺): max. 3 000 µg/l
• Manganese (Mn²⁺): max. 100 µg/l
• Hydrogen sulfide (H₂S): max. 5 mg/l
• Permissible pH level (for iron removal): 6.8 – 9.0
• Permissible pH level (for manganese removal): 8.0 – 9.0
0.0 EUR
DWS 8 PLUS water softening and iron removal system
DWS 8 PLUS is an automatic water purification system that simultaneously reduces water hardness, iron content, ammonia and turbidity. It is suitable for private homes and other objects where quality water purification is required for the entire water supply system.

The unit operates fully automatically – the Clack control unit controls the filtration and regeneration processes, ensuring stable operation and simple operation.

The main advantages
🔹 Simultaneously reduces water hardness, iron content, ammonia and turbidity.
🔹 Fully automatic operation without daily adjustment.
Integrated water consumption meter for automatic regeneration control.
🔹 Automatic regeneration cycles ensure stable filtration efficiency.
🔹 Durable composite tank with fiberglass reinforcement.
🔹 Suitable for private homes and other water supply facilities.
🔹 Easy operation and convenient maintenance.
🔹 CLACK control system ensures precise and reliable operation.

How does DWS 8 PLUS work?
Untreated water enters the filter and flows through the filter material, where water hardness, iron content, ammonia and turbidity are reduced. The purified water is then fed to the home water supply system.

When the set water treatment capacity is reached, the control unit automatically starts the regeneration cycle. It includes counterflow flushing, reagent suction, flushing and refilling the reagent tank to restore the working capacity of the filter material.

Technical Specification:
• Maximum output (Qmax): 0.6 m³/h
• Water consumption per regeneration: ~100 litres
• Minimum flushing flow: 0.6 m³/h
• Volume of filter material: 15 litres
• Hopper capacity: 25 litres
• Dimensions (Length × Width × Height): 530 × 200 × 1080 mm
• Tank size: 8" × 0.20m
• Salt tank capacity: 25 litres
• Connection dimensions: Inlet 1", Outlet 1", Sewer 3/4"

General technical parameters:
• Control unit: automatic Clack CI 1" (US).
• Purification capabilities: water hardness reduction, iron, ammonia and turbidity reduction.
• Filter material: ion exchange resin Ecotar B and quartz sand (fractions 1×3 mm and 3×5 mm).
• Tank material: FRP composite material (fiberglass body).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
• Power consumption: 3 W.

Application:
DWS 8 PLUS is suitable for private homes, cottages, offices, small commercial buildings, places where it is necessary to reduce water hardness and iron content, as well as to improve the overall water quality.
632.25 € 632.25 EUR
DWS 9 PLUS water softening and iron removal system
DWS 9 PLUS is an automatic water purification system that simultaneously reduces water hardness, iron content, ammonia and turbidity. It is suitable for private homes and other objects where quality water purification is required for the entire water supply system.

The unit operates fully automatically – the Clack control unit controls the filtration and regeneration processes, ensuring stable operation and simple operation.

The main advantages
🔹 Simultaneously reduces water hardness, iron content, ammonia and turbidity.
🔹 Fully automatic operation without daily adjustment.
Integrated water consumption meter for automatic regeneration control.
🔹 Automatic regeneration cycles ensure stable filtration efficiency.
🔹 Durable composite tank with fiberglass reinforcement.
🔹 Suitable for private homes and other water supply facilities.
🔹 Easy operation and convenient maintenance.
🔹 CLACK control system ensures precise and reliable operation.

How does DWS 9 PLUS work?
Untreated water enters the filter and flows through the filter material, where water hardness, iron content, ammonia and turbidity are reduced. The purified water is then fed to the home water supply system.

When the set water treatment capacity is reached, the control unit automatically starts the regeneration cycle. It includes counterflow flushing, reagent suction, flushing and refilling the reagent tank to restore the working capacity of the filter material.

Technical Specification:
• Maximum output (Qmax): 1.0 m³/h
• Water consumption per regeneration: ~130 litres
• Minimum flushing flow: 0.8 m³/h
• Volume of filter material: 25 litres
• Hopper capacity: 32 litres
• Dimensions (Length × Width × Height): 560 × 240 × 1410 mm
• Tank size: 9" × 0.24m
• Salt tank capacity: 70 litres
• Connection dimensions: Inlet 1", Outlet 1", Sewer 3/4"

General technical parameters:
• Control unit: automatic Clack CI 1" (US).
• Purification capabilities: water hardness reduction, iron, ammonia and turbidity reduction.
• Filter material: ion exchange resin Ecotar B and quartz sand (fractions 1×3 mm and 3×5 mm).
• Tank material: FRP composite material (fiberglass body).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
• Power consumption: 3 W.
764.95 € 764.95 EUR
DWS 10 PLUS water softening and iron removal system
DWS 10 PLUS is an automatic water purification system that simultaneously reduces water hardness, iron content, ammonia and turbidity. It is suitable for private homes and other objects where quality water purification is required for the entire water supply system.

The unit operates fully automatically – the Clack control unit controls the filtration and regeneration processes, ensuring stable operation and simple operation.

The main advantages
🔹 Simultaneously reduces water hardness, iron content, ammonia and turbidity.
🔹 Fully automatic operation without daily adjustment.
Integrated water consumption meter for automatic regeneration control.
🔹 Automatic regeneration cycles ensure stable filtration efficiency.
🔹 Durable composite tank with fiberglass reinforcement.
🔹 Suitable for private homes and other water supply facilities.
🔹 Easy operation and convenient maintenance.
🔹 CLACK control system ensures precise and reliable operation.

How does DWS 10 PLUS work?
Untreated water enters the filter and flows through the filter material, where water hardness, iron content, ammonia and turbidity are reduced. The purified water is then fed to the home water supply system.

When the set water treatment capacity is reached, the control unit automatically starts the regeneration cycle. It includes counterflow flushing, reagent suction, flushing and refilling the reagent tank to restore the working capacity of the filter material.

Technical Specification:
• Maximum output (Qmax): 1.6 m³/h
• Water consumption per regeneration: ~156 litres
• Minimum flushing flow: 1.0 m³/h
• Volume of filter material: 40 litres
• Hopper capacity: 64 litres
• Dimensions (Length × Width × Height): 590 × 250 × 1570 mm
• Tank size: 10" × 0.25m
• Salt tank capacity: 25 litres
• Connection dimensions: Inlet 1", Outlet 1", Sewer 3/4"

General technical parameters:
• Control unit: automatic Clack CI 1" (US).
• Purification capabilities: water hardness reduction, iron, ammonia and turbidity reduction.
• Filter material: ion exchange resin Ecotar B and quartz sand (fractions 1×3 mm and 3×5 mm).
• Tank material: FRP composite material (fiberglass body).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
• Power consumption: 3 W.
853.55 € 853.5500000000001 EUR
DWS 12 PLUS water softening and iron removal system
DWS 12 PLUS is an automatic water purification system that simultaneously reduces water hardness, iron content, ammonia and turbidity. It is suitable for private homes and other objects where quality water purification is required for the entire water supply system.

The unit operates fully automatically – the Clack control unit controls the filtration and regeneration processes, ensuring stable operation and simple operation.

The main advantages
🔹 Simultaneously reduces water hardness, iron content, ammonia and turbidity.
🔹 Fully automatic operation without daily adjustment.
Integrated water consumption meter for automatic regeneration control.
🔹 Automatic regeneration cycles ensure stable filtration efficiency.
🔹 Durable composite tank with fiberglass reinforcement.
🔹 Suitable for private homes and other water supply facilities.
🔹 Easy operation and convenient maintenance.
🔹 CLACK control system ensures precise and reliable operation.

How does DWS 12 PLUS work?
Untreated water enters the filter and flows through the filter material, where water hardness, iron content, ammonia and turbidity are reduced. The purified water is then fed to the home water supply system.

When the set water treatment capacity is reached, the control unit automatically starts the regeneration cycle. It includes counterflow flushing, reagent suction, flushing and refilling the reagent tank to restore the working capacity of the filter material.

Technical Specification:
• Maximum output (Qmax): 2.2 m³/h
• Water consumption per regeneration: ~200 litres
• Minimum flushing flow: 1.5 m³/h
• Volume of filter material: 55 litres
• Hopper capacity: 85 litres
• Dimensions (Length × Width × Height): 640 × 300 × 1520 mm
• Tank size: 12" × 0.30m
• Salt tank capacity: 70 litres
• Connection dimensions: 1"

General technical parameters:
• Control unit: automatic Clack CI 1" (US).
• Purification capabilities: water hardness reduction, iron, ammonia and turbidity reduction.
• Filter material: ion exchange resin Ecotar B and quartz sand (fractions 1×3 mm and 3×5 mm).
• Tank material: FRP composite material (fiberglass body).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
• Power consumption: 3 W.
976.55 € 976.5500000000001 EUR
DWS 13 PLUS water softening and iron removal system
DWS 13 PLUS is an automatic water purification system that simultaneously reduces water hardness, iron content, ammonia and turbidity. It is suitable for private homes and other objects where quality water purification is required for the entire water supply system.

The unit operates fully automatically – the Clack control unit controls the filtration and regeneration processes, ensuring stable operation and simple operation.

The main advantages
🔹 Simultaneously reduces water hardness, iron content, ammonia and turbidity.
🔹 Fully automatic operation without daily adjustment.
Integrated water consumption meter for automatic regeneration control.
🔹 Automatic regeneration cycles ensure stable filtration efficiency.
🔹 Durable composite tank with fiberglass reinforcement.
🔹 Suitable for private homes and other water supply facilities.
🔹 Easy operation and convenient maintenance.
🔹 CLACK control system ensures precise and reliable operation.

How does DWS 13 PLUS work?
Untreated water enters the filter and flows through the filter material, where water hardness, iron content, ammonia and turbidity are reduced. The purified water is then fed to the home water supply system.

When the set water treatment capacity is reached, the control unit automatically starts the regeneration cycle. It includes counterflow flushing, reagent suction, flushing and refilling the reagent tank to restore the working capacity of the filter material.

Technical Specification:
• Maximum output (Qmax): 2.8 m³/h
• Water consumption per regeneration: ~250 litres
• Minimum flushing flow: 1.7 m³/h
• Volume of filter material: 70 litres
• Hopper capacity: 110 litres
• Dimensions (Length × Width × Height): 840 × 330 × 1570 mm
• Tank size: 13" × 0.33m
• Salt tank capacity: 100 litres
• Connection dimensions: 1"

General technical parameters:
• Control unit: automatic Clack CI 1" (US).
• Purification capabilities: water hardness reduction, iron, ammonia and turbidity reduction.
• Filter material: ion exchange resin Ecotar B and quartz sand (fractions 1×3 mm and 3×5 mm).
• Tank material: FRP composite material (fiberglass body).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
• Power consumption: 3 W.
1,086.80 € 1086.8 EUR
DWS 14 PLUS water softening and iron removal system
DWS 14 PLUS is an automatic water purification system that simultaneously reduces water hardness, iron content, ammonia and turbidity. It is suitable for private homes and other objects where quality water purification is required for the entire water supply system.

The unit operates fully automatically – the Clack control unit controls the filtration and regeneration processes, ensuring stable operation and simple operation.

The main advantages
🔹 Simultaneously reduces water hardness, iron content, ammonia and turbidity.
🔹 Fully automatic operation without daily adjustment.
Integrated water consumption meter for automatic regeneration control.
🔹 Automatic regeneration cycles ensure stable filtration efficiency.
🔹 Durable composite tank with fiberglass reinforcement.
🔹 Suitable for private homes and other water supply facilities.
🔹 Easy operation and convenient maintenance.
🔹 CLACK control system ensures precise and reliable operation.

How does DWS 14 PLUS work?
Untreated water enters the filter and flows through the filter material, where water hardness, iron content, ammonia and turbidity are reduced. The purified water is then fed to the home water supply system.

When the set water treatment capacity is reached, the control unit automatically starts the regeneration cycle. It includes counterflow flushing, reagent suction, flushing and refilling the reagent tank to restore the working capacity of the filter material.

Technical Specification:
• Maximum output (Qmax): 3.5 m³/h
• Water consumption per regeneration: ~300 litres
• Minimum flushing flow: 2.0 m³/h
• Volume of filter material: 100 litres
• Hopper capacity: 145 litres
• Dimensions (Length × Width × Height): 870 × 370 × 1870 mm
• Tank size: 14" × 0.37m
• Salt tank capacity: 100 litres
• Connection dimensions: 1 ¼”

General technical parameters:
• Control unit: automatic Clack CI 1.25'' (US).
• Purification capabilities: water hardness reduction, iron, ammonia and turbidity reduction.
• Filter material: ion exchange resin Ecotar B and quartz sand (fractions 1×3 mm and 3×5 mm).
• Tank material: FRP composite material (fiberglass body).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
• Power consumption: 3 W.
0.0 EUR
DWS 8 TWIN continuous-duty water softening system
DWS 8 TWIN is an automatic water purification system that simultaneously reduces water hardness, iron content, ammonia and turbidity. Thanks to Twin technology, the system ensures a continuous supply of purified water – while one filtration column regenerates, the other continues to purify the water.

The unit is suitable for private homes, apartment buildings and other objects with higher water consumption, where stable and continuous water purification is important.

The automatic Clack CI TWIN control unit controls the filtration and regeneration process, ensuring reliable operation without daily user intervention.

Why choose DWS TWIN?
🔹 Softer and cleaner water every day. Reduces water hardness, iron content, ammonia and turbidity.
🔹 Purified water without interruptions. While one column performs regeneration, the other continues to purify the water.
🔹 Less limescale and rust. Helps protect plumbing, pipes and household appliances from deposits.
🔹 Fully automatic operation. Clack CI TWIN control unit automatically controls filtration and regeneration.
🔹 Suitable for higher water consumption. The ideal solution for families and facilities with intensive water consumption.
🔹 Reliable operation in the long term. High-quality components and durable construction ensure a long service life.

Technical Specification:
• Rated output (Qnom): 0.4 m³/h
• Maximum output (Qmax): 0.6 m³/h
• Maximum flow rate: 3.0 m³/h
• Capacity between regenerations: up to 2300 liters*
• Water consumption per regeneration: ~70 litres
• Salt consumption per regeneration cycle: ~2.3 kg
• Minimum flushing flow: 0.26 m³/h
• Dimensions (Length × Width × Height): 530 × 280 × 1080 mm
• Tank size: 8" × 0.20m
• Hopper capacity: 25 litres
• Amount of filter material in the tank: 15 litres
• Salt container capacity: 25 litres (up to 1 for a bag of salt)
• Connection dimensions: Inlet 1", Outlet 1", Sewer 1"
*Calculated at inlet water quality: iron – 200 µg/l, hardness – 6,0 mg-eq/l.

General technical parameters:
• Control unit: automatic Clack CI TWIN 1".
• Purification capabilities: reduces water hardness, iron content, ammonia and turbidity.
• Filter material: ion exchange resin Resinex KW-8 and quartz sand (fractions 1×3 mm and 3×5 mm).
• Tank material: FRP (fiberglass composite).
• Operating pressure: 2–6 bar.
Electrical connection: 220 V / 50 Hz, 1 phase.
Power consumption: 3 W.
1,060.55 € 1060.55 EUR
DWS 8 DUPLEX continuous-duty water softening system
DWS 8 DUPLEX is an automatic water purification system that simultaneously reduces water hardness, iron content, ammonia and turbidity. Thanks to the DUPLEX technology with two parallelly operating filtration columns, the system ensures a continuous supply of purified water to the 24/7, even during single column regeneration.

The unit is suitable for private homes, apartment buildings and commercial buildings with higher water consumption, where stable and continuous water purification is required. The automatic Clack CI control unit controls the filtration and regeneration processes, ensuring a fully autonomous system operation.

Why choose DWS DUPLEX?
🔹 Softer and cleaner water every day. Reduces water hardness, iron content, ammonia and turbidity.
🔹 Purified water 24/7 without interruptions. Two parallelly operating columns ensure a continuous water supply even during regeneration.
🔹 Less limescale and rust. Helps protect plumbing, pipes and household appliances from deposits.
🔹 Fully automatic operation. Clack control units automatically control filtration and regeneration.
🔹 Suitable for higher water consumption. A great choice for homes and commercial buildings with intensive water consumption.
🔹 Reliable operation in the long term. Durable FRP tanks and quality components ensure a long service life.

Technical Specification:
• Rated output (Qnom): 0.8 m³/h
• Maximum output (Qmax): 1.2 m³/h
• Maximum flow rate: 6.0 m³/h
• Filter capacity between regenerations: up to 2300 liters*
• Water consumption per regeneration: ~70 litres
• Salt consumption per regeneration cycle: ~2.3 kg
• Minimum rinsing intensity: 0.26 m³/h
• Dimensions (Length × Width × Height): 1.25 × 0.29 × 1.57 m
• Tank size: 8" x 0.21m
• Hopper capacity: 25 litres
• Filter media volume: 15 litres
• Water connections: Inlet 1", Outlet 1", Sewerage 1"
*Calculated at inlet water quality: iron – 200 µg/l, hardness – 6,0 mg-eq/l.

General technical parameters:
• Control unit: automatic Clack CI 1" NHVB ×2.
• Purification capabilities: reduces water hardness, iron content, ammonia and turbidity.
• Filter material: ion exchange resin Resinex KW-8 and quartz sand (1×3 mm, 3×5 mm).
• Tank material: FRP (fiberglass composite).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
• Power consumption: 3 W.
1,605.85 € 1605.8500000000001 EUR
DWS 9 DUPLEX continuous-duty water softening system
DWS 9 DUPLEX is an automatic water purification system that simultaneously reduces water hardness, iron content, ammonia and turbidity. Thanks to the DUPLEX technology with two parallelly operating filtration columns, the system ensures a continuous supply of purified water to the 24/7, even during single column regeneration.

The unit is suitable for private homes, apartment buildings and commercial buildings with higher water consumption, where stable and continuous water purification is required. The automatic Clack CI control unit controls the filtration and regeneration processes, ensuring a fully autonomous system operation.

Why choose DWS DUPLEX?
🔹 Softer and cleaner water every day. Reduces water hardness, iron content, ammonia and turbidity.
🔹 Purified water 24/7 without interruptions. Two parallelly operating columns ensure a continuous water supply even during regeneration.
🔹 Less limescale and rust. Helps protect plumbing, pipes and household appliances from deposits.
🔹 Fully automatic operation. Clack control units automatically control filtration and regeneration.
🔹 Suitable for higher water consumption. A great choice for homes and commercial buildings with intensive water consumption.
🔹 Reliable operation in the long term. Durable FRP tanks and quality components ensure a long service life.

Technical Specification:
• Rated output (Qnom): 1.2 m³/h
• Maximum output (Qmax): 2.0 m³/h
• Maximum flow rate: 6.0 m³/h
• Filter capacity between regenerations: up to 3800 liters*
• Water consumption per regeneration: ~100 litres
• Salt consumption per regeneration cycle: ~3.8 kg
• Minimum rinsing intensity: 0.33 m³/h
• Dimensions (Length × Width × Height): 1.25 × 0.33 × 1.67m
• Tank size: 9" x 0.23m
• Hopper capacity: 32 litres
• Filter media volume: 25 litres
• Water connections: Inlet 1", Outlet 1", Sewerage 1"
*Calculated at inlet water quality: iron – 200 µg/l, hardness – 6,0 mg-eq/l.

General technical parameters:
• Control unit: automatic Clack CI 1" NHVB ×2.
• Purification capabilities: reduces water hardness, iron content, ammonia and turbidity.
• Filter material: ion exchange resin Resinex KW-8 and quartz sand (1×3 mm, 3×5 mm).
• Tank material: FRP (fiberglass composite).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
Power consumption: 3 W.
1,833.45 € 1833.45 EUR
DWS 9 TWIN continuous-duty water softening system
DWS 9 TWIN is an automatic water purification system that simultaneously reduces water hardness, iron content, ammonia and turbidity. Thanks to Twin technology, the system ensures a continuous supply of purified water – while one filtration column regenerates, the other continues to purify the water.

The unit is suitable for private homes, apartment buildings and other objects with higher water consumption, where stable and continuous water purification is important.

The automatic Clack CI TWIN control unit controls the filtration and regeneration process, ensuring reliable operation without daily user intervention.

Why choose DWS TWIN?
🔹 Softer and cleaner water every day. Reduces water hardness, iron content, ammonia and turbidity.
🔹 Purified water without interruptions. While one column performs regeneration, the other continues to purify the water.
🔹 Less limescale and rust. Helps protect plumbing, pipes and household appliances from deposits.
🔹 Fully automatic operation. Clack CI TWIN control unit automatically controls filtration and regeneration.
🔹 Suitable for higher water consumption. The ideal solution for families and facilities with intensive water consumption.
🔹 Reliable operation in the long term. High-quality components and durable construction ensure a long service life.

Technical Specification:
• Rated output (Qnom): 0.6 m³/h
• Maximum output (Qmax): 1.0 m³/h
• Maximum flow rate: 3.0 m³/h
• Capacity between regenerations: up to 3800 liters*
• Water consumption per regeneration: ~100 litres
• Salt consumption per regeneration cycle: ~3.8 kg
• Minimum flushing flow: 0.33 m³/h
• Dimensions (Length × Width × Height): 560 × 280 × 1410 mm
• Tank size: 9" × 0.24m
• Hopper capacity: 32 litres
• Amount of filter material in the tank: 25 litres
• Salt tank capacity: 70 litres (up to 3.5 bags of salt)
• Connection dimensions: Inlet 1", Outlet 1", Sewer 1"
*Calculated at inlet water quality: iron – 200 µg/l, hardness – 6,0 mg-eq/l.

General technical parameters:
• Control unit: automatic Clack CI TWIN 1".
• Purification capabilities: reduces water hardness, iron content, ammonia and turbidity.
• Filter material: ion exchange resin Resinex KW-8 and quartz sand (fractions 1×3 mm and 3×5 mm).
• Tank material: FRP (fiberglass composite).
• Operating pressure: 2–6 bar.
Electrical connection: 220 V / 50 Hz, 1 phase.
Power consumption: 3 W.
1,209.40 € 1209.4 EUR
DWS 10 TWIN continuous-duty water softening system
DWS 10 TWIN is an automatic water purification system that simultaneously reduces water hardness, iron content, ammonia and turbidity. Thanks to Twin technology, the system ensures a continuous supply of purified water – while one filtration column regenerates, the other continues to purify the water.

The unit is suitable for private homes, apartment buildings and other objects with higher water consumption, where stable and continuous water purification is important.

The automatic Clack CI TWIN control unit controls the filtration and regeneration process, ensuring reliable operation without daily user intervention.

Why choose DWS TWIN?
🔹 Softer and cleaner water every day. Reduces water hardness, iron content, ammonia and turbidity.
🔹 Purified water without interruptions. While one column performs regeneration, the other continues to purify the water.
🔹 Less limescale and rust. Helps protect plumbing, pipes and household appliances from deposits.
🔹 Fully automatic operation. Clack CI TWIN control unit automatically controls filtration and regeneration.
🔹 Suitable for higher water consumption. The ideal solution for families and facilities with intensive water consumption.
🔹 Reliable operation in the long term. High-quality components and durable construction ensure a long service life.

Technical Specification:
• Rated output (Qnom): 1.0 m³/h
• Maximum output (Qmax): 1.6 m³/h
• Maximum flow rate: 3.0 m³/h
• Capacity between regenerations: up to 6000 liters*
• Water consumption per regeneration: ~150 litres
• Salt consumption per regeneration cycle: ~6 kg
• Minimum flushing flow: 0.41 m³/h
• Dimensions (Length × Width × Height): 590 × 280 × 1570 mm
• Tank size: 10" × 0.25m
• Hopper capacity: 64 litres
• Amount of filter material in the tank: 40 litres
• Salt tank capacity: 70 litres (up to 3.5 bags of salt)
• Connection dimensions: Inlet 1", Outlet 1", Sewer 1"
*Calculated at inlet water quality: iron – 200 µg/l, hardness – 6,0 mg-eq/l.

General technical parameters:
• Control unit: automatic Clack CI TWIN 1".
• Purification capabilities: reduces water hardness, iron content, ammonia and turbidity.
• Filter material: ion exchange resin Resinex KW-8 and quartz sand (fractions 1×3 mm and 3×5 mm).
• Tank material: FRP (fiberglass composite).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
• Power consumption: 3 W.
1,348.00 € 1348.0 EUR
DWS 12 TWIN continuous-duty water softening system
DWS 12 TWIN is an automatic water purification system that simultaneously reduces water hardness, iron content, ammonia and turbidity. Thanks to Twin technology, the system ensures a continuous supply of purified water – while one filtration column regenerates, the other continues to purify the water.

The unit is suitable for private homes, apartment buildings and other objects with higher water consumption, where stable and continuous water purification is important.

The automatic Clack CI TWIN control unit controls the filtration and regeneration process, ensuring reliable operation without daily user intervention.

Why choose DWS TWIN?
🔹 Softer and cleaner water every day. Reduces water hardness, iron content, ammonia and turbidity.
🔹 Purified water without interruptions. While one column performs regeneration, the other continues to purify the water.
🔹 Less limescale and rust. Helps protect plumbing, pipes and household appliances from deposits.
🔹 Fully automatic operation. Clack CI TWIN control unit automatically controls filtration and regeneration.
🔹 Suitable for higher water consumption. The ideal solution for families and facilities with intensive water consumption.
🔹 Reliable operation in the long term. High-quality components and durable construction ensure a long service life.

Technical Specification:
• Rated output (Qnom): 1.4 m³/h
• Maximum output (Qmax): 2.2 m³/h
• Maximum flow rate: 3.0 m³/h
• Capacity between regenerations: up to 8300 liters*
• Water consumption per regeneration: ~200 litres
• Salt consumption per regeneration cycle: ~8.3 kg
• Minimum flushing flow: 0.58 m³/h
• Dimensions (Length × Width × Height): 640 × 300 × 1520 mm
• Tank size: 12" × 0.30m
• Hopper capacity: 85 litres
• Amount of filter material in the tank: 55 litres
• Salt tank capacity: 70 litres (up to 3.5 bags of salt)
• Connection dimensions: Inlet 1", Outlet 1", Sewer 1"
*Calculated at inlet water quality: iron – 200 µg/l, hardness – 6,0 mg-eq/l.

General technical parameters:
• Control unit: automatic Clack CI TWIN 1".
• Purification capabilities: reduces water hardness, iron content, ammonia and turbidity.
• Filter material: ion exchange resin Resinex KW-8 and quartz sand (fractions 1×3 mm and 3×5 mm).
• Tank material: FRP (fiberglass composite).
• Operating pressure: 2–6 bar.
• Electrical connection: 220 V / 50 Hz, 1 phase.
• Power consumption: 3 W.
1,580.05 € 1580.05 EUR

Drinking Water Filters